Your DIY Guide to a Beautifully Stained, Durable Concrete Floor

Concrete floors are a smart choice for just about any living space—family rooms, basements, workspaces, and beyond. With the Stain My Interior Concrete Floor Project Kit, you’ll get all the professional-grade materials you need to clean, stain, seal, and protect your floor in a single weekend. This guide walks you through each step with a simple checklist, tool list, and expert tips to help you get professional results on your own.

Please Note: The colors on screen vary from device to device. It is important to test the color(s) chosen on your own concrete surface. 4 oz test samples of all Eco-Stain colors can be purchased here.

  Before You Begin This Project  

Please read through all of the instructions, Technical Data Sheets (TDS), Safety Data Sheets (SDS), and review all of the materials and tools required to ensure you have everything needed for the project.

Materials Included in the Stain My Interior Concrete Project Kit:

• SureCrete SCR Concrete Cleaner and Degreaser
• SureCrete Eco-Stain Water-Based Stain
• Concrete Coatings SuperSeal 20WB
• SureCrete SureFinish Sacrificial Wax

Tools Needed:

• 1-Gallon Plastic Pump-Up Sprayer
• 9" or 18" Paint Tray
• 4" Roller Frame/Cover
• 9" or 18" Roller Frame/Cover
• 2" Painter's Tape
• 48" Masking Film
• Sanding Block
• Gloves
• Safety Glasses
• Microfiber Applicator/Handle

  Watch the STEP-BY-STEP Process  

From prep and stain to seal and wax, this quick video shows the entire process using the products from your kit. It’s a great way to get familiar with the materials and techniques before you get started. 

Full written instructions are included below, and there’s a downloadable version too, if you want to keep it handy.

Please note: This video uses a different sealer than what is included in this kit, but the application is the same.

  Prepare Your Surface  

1. Protect surrounding walls, trim and other surfaces from overspray by using 48” masking film and blue painter’s tape to secure the film.
2. Sweep and mop the floor to look for any glue or contaminants which could affect the ability of the stain to penetrate.
3. Run over the surface with a palm sander (80 grit sandpaper) or a sanding block to open the pores of the concrete and remove any glue or contaminants. 

SureCrete SCR Cleaner and Degreaser

4. Mix 1:1 with water and pour into a pump-up sprayer.
5. Spray across entire surface and use a stiff bristle brush to work the material down into the substrate.

6. Ensure the surface remains partially damp during the process to allow for good penetration.
7. Neutralize the surface with water, THOROUGHLY RINSE AND ALLOW TO DRY before moving on to staining your concrete.

  Stain Your Concrete  

8. Shake the bottle of Eco-Stain thoroughly to ensure all the pigment is incorporated.
9. Mix 3 parts water to 1 part Eco-Stain in a clean bucket and pour into a pump-up sprayer. 
10. Apply using a circular motion to avoid overlap marks or patterns from the sprayer.

11. Surface should remain slightly damp during application to allow for good penetration.
12. Let the stain dry overnight, then gently use a dry microfiber/Swiffer pad on the surface. This will lift off any extra pigment or dust sitting on top. Excess stain pigment must be removed for best sealer adhesion.
13. Once that’s done, you’re ready to seal and protect your newly stained concrete.

  Seal and Protect Your Concrete  

Concrete Coatings SuperSeal 20WB Water-Based Acrylic Sealer

14. Thoroughly shake the bottle of sealer and then pour it into a clean roller pan.
15. Cut in along edges using a small roller or brush to create a clean line and avoid material getting onto surrounding surfaces.

16. Use a 9” or 18" roller to apply material uniformly over the remainder of the surface. Ensure there are no missed spots, or areas of heavy accumulation or puddles.
17. Allow to dry.
18. Once dry, apply a second coat and allow to dry. Then, move on to waxing your concrete.

SureCrete SureFinish Sacrificial Wax

Note: Waxing the surface provides several benefits, it’s an easy way to protect the sealer and extend its lifespan. Plus, contrary to popular belief, it actually improves slip resistance.

19. Thoroughly shake the bottle of SureFInish and pour a ribbon of material on the floor and apply using a microfiber applicator.
20. Saturate the applicator and spread uniformly across the surface.

21. Ensure there are no puddles or missed spots.

22. Allow to DRY 2 HOURS MINIMUM.
23. Apply second coat and allow to dry.
24. Maintain by recoating occasionally (1-3/year) to preserve the wax’s protective properties.

  You're Ready to Make it Happen  

With the right materials, a solid plan, and a little effort, you can completely transform your interior concrete in just a weekend. Whether it’s your first time staining or you’ve tackled concrete projects before, the Stain My Interior Concrete Kit makes it easy to get results you’ll be proud of.

Don't forget, there’s a downloadable version of these instructions too, if you want to keep it handy.

If you have any questions along the way, we’re here to help. Reach out anytime at contact@diyconcretemail.com—we’re happy to support you at any step.